How Do You Replace A Kohler Faucet?

Do Kohler faucets have a lifetime warranty?

Kohler Co.

warrants its Faucets* manufactured after January 1, 1997, to be leak and drip free during normal residential use for as long as the original consumer purchaser owns his or her home..

How do you take apart a Kohler kitchen faucet?

Search under the sink or cabinets for the water main control. Turn the handles of the water main at least half a turn to the left to shut them off. Push the faucet handle all the way into the “up” position. Insert the hex key into the star-shaped hole and turn it counterclockwise until the faucet comes loose.

Why does my faucet drip after I turn it off?

If it still runs or drips when both are shut off, then both are not doing their job. It is quite common for both the faucet and the under-sink valves to have rubber washers as the surface that seals when the valve is turned off. … Fixing the under-sink valves will require shutting off the water supply to the apartment.

How do you remove a single handle from a Kohler kitchen faucet?

Replace the Valve in a Single Handle FaucetTurn off the water to the faucet.Remove the plug button from the handle (Fig. … Loosen the screw underneath the plug button to remove the handle (Fig. … Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig.More items…

Is Kohler replacement parts free?

Kohler Co. also warrants all other aspects of the faucet or accessories (“Faucet”)*, (except gold, non-Vibrant®, non- chrome finishes) to be free of defects in material and workmanship during normal residential use for as long as the original consumer purchaser owns his or her home.

How do I replace a Kohler kitchen faucet?

Slip a flat-head screwdriver under this oval tab to pop it off and reveal the hex nut. Use an Allen wrench to remove that nut and the handle. Next, twist the neck counterclockwise to remove it from the handle. Use an adjustable wrench to remove the kitchen faucet nut holding the cartridge down.

How do I identify my Kohler faucet?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”

How do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.

How do you take apart a Moen kitchen faucet?

Steps to follow to remove a Moen kitchen faucetStep 1: Turn off water. … Step 2: Drain the pipes. … Step 3: Remove the handle. … Step 4: Remove the dome and plastic sleeve. … Step 5: Removing the handle mechanism. … Step 6: Remove the ring and washer. … Step 7: Remove the spout. … Step 8: Pull out the cartridge.

Which faucets have lifetime warranty?

The Delta Faucet Lifetime Limited Warranty is one of the most extensive in the industry. It covers manufacturer defects in faucet function as well as faucet finish, provided you are the original purchaser. Labor charges and/or damage incurred during installation, repair or replacement are excluded.

What is Kohler faucet warranty?

Warranty Information All Kohler Plumbing Products carry Kohler’s one-year limited warranty unless otherwise noted. Parts Need a replacement part but don’t know which product you have?