Question: Does A Power Commander Replace The ECU?

What does flashing your ECU do?

ECU flashing, also referred to as tuning, updates the software that runs your vehicle by changing or modifying the vehicle’s memory chip in the ECU.

These changes can notably improve your engine performance by improving power, producing cleaner emissions and bettering fuel efficiency..

What happens if my ECU is bad?

If the ECU has any issues, it may throw off the timing and fuel settings of the engine, which can negatively affect performance. A faulty ECU may cause the vehicle to experience a reduction in fuel efficiency, power, acceleration.

How much does it cost to replace a ECU?

You should expect to pay between $150 and $300 at a local repair shop or service center just to have the ECU inspected and tested. In many cases, the faulty ECU can be repaired or reprogrammed, and this type of repair will usually run between $300 to $750, depending on the make and model of your vehicle.

Will a power commander void my warranty?

Q)Will the Power Commander void my warranty? … As the Power Commander cannot send current to the stock ECU, it is highly unlikely that it could damage the stock system in any way.

Is a Power Commander worth it?

Generally, the benefits of a power commander will work best with a full system exhaust (not a slip-on), as it creates more power and allows for a wider range of adjustments. If you’re more performance oriented, then a power commander may be worth the investment to get a smoother, more powerful ride.

Is Power Commander V plug and play?

Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.

How much does it cost to get a ECU flashed?

On the extreme low end, an ECU flashing could cost around $300, but it can go as high as $3,000. Flashing kits are available for a few hundred dollars, and some people do ECU tuning as a sort of hobby or side business.

Does a power commander make a big difference?

this smooths out your power curve making power delivery better while gaining a few HP throughout the rev range, so in terms of making your bike run better, especially with an aftermarket slip on & filter, then yes it does make a difference.

Does Power Commander add horsepower?

Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque. … This will often give an increase in overall horsepower.

Can a Power Commander hurt a motorcycle?

Changing the air filter and exhaust can make some bikes run a bit rough so the PC is needed to smooth it out. If the previous owner is running a power Commander, then he or she took the time to correct fueling for the full exhaust system. … I’d say no risk of damage because of a full exhaust and PC.

Does ECU flash void warranty motorcycle?

Yes, if they somehow find out your ECU is reflashed any motor work will not be covered under warranty.

Do you need a Power Commander for a dyno tune?

yes you need a powercommander for a dyno tune. That is what they tune that controls how much fuel is pumped into your engine. You also should install block off plates. It may help with some of the popping as well.

Do I need a power commander with a full exhaust?

The quick and easy answer to the question is “no.” You don’t “need” to do anything with your bike. In the case of adding a Power Commander with a full aftermarket exhaust, it is possible to get by without one. … For many riders, an exhaust change with no Power Commander can lead to a loss of usable power.

How can I increase the power of my motorcycle engine?

How to Increase Motorcycle HorsepowerIncrease Your Bike’s Air Intake. … Upgrade Your Exhaust System. … Plug-In an Aftermarket Tuner or Reflash the ECU. … Install a New Jet Kit for the Carburetor. … Modify Your Ignition. … Order Custom Parts and Accessories.