How do you retune a pure one DAB radio?
Do the auto-tuneIf your digital radio has an auto-tune or auto-scan button, press it.If there’s no obvious auto-tune or auto-scan button, press the ‘menu’ button and go through the options until you find something marked ‘auto-tune’ or ‘auto-scan’, and select that..
How do I reset my pure radio?
Press and hold the ‘Options’ button down for two or three seconds and confirm the reset when prompted. Instructions for Sensia: Make sure your radio is switched on. Tap ‘Settings’, tap ‘Update’ and tap ‘Factory Reset’. Confirm the reset when prompted.
Why does my DAB radio not work?
Sometimes your car stereo display will say something like “No signal” or “No service”, meaning that you can’t receive any DAB radio stations. This could be caused by a fault with the DAB radio itself, or failure to install the aerial properly.
How do I update my DAB radio?
Press ‘Menu’ button on your digital radio 2. Rotate the ‘Tune’ button until you see ‘Autotune’ in the display 3. Select ‘Autotune’ 4. As new stations are found the station counter on the right hand side of the display will increase and new stations will be added to the list 5.
Why is DAB reception so bad?
A lot of users don’t even realise that their DAB radio problems are down to a poor signal. … That’s because they are so used to that trademark hiss and crackle of FM radio interference. However, DAB radio works in a completely different way to FM. That means a weak signal will manifest itself in other ways.
Why can’t I get all DAB stations?
This is due to the stations moving to a different network of digital radio transmitters. Your radio might not have found a strong enough signal to store them in the station list.
How do I reset my Roberts DAB radio?
System resetPress and hold down the Info button for 2 seconds.Rotate the Tuning control until the display shows “Factory reset”, then press and release the Tuning control.If you wish to perform the reset operation, press and release the Tuning. control one more time. … After a system reset a scan of the DAB band will be performed.
Why can’t I get smooth extra on my DAB radio?
If you’ve lost Smooth on your DAB radio, it’s because it has moved to local multiplexes (bundles of stations).